The Form

11" exterior widths with factory-produced 90 degree and 45 degree corners.

Universal design means you can flip or reverse the forms--all edges fit perfectly with all other edges.  Flip the corner forms to use for either right or left-hand corners.

Horizontal tie rods on 8" centers allow you to cut the foam in half and use both halves, eliminating waste.

Plastic ties on 6" centers give unmatched strength during concrete placement resulting in straight, plum and true walls.  And most cut pieces can be reused, eliminating waste again.

Open 1" tooth design, which reduces collection of debree or ice.  Beveled interior edges offer quick installation and assembly.

The Tie

Multiple rebar holders allow you to place rebar on the inside, middle, or outside of the wall as conditions require.  Or you can alternate the rebar position on different courses.

The rebar holders are loose enough to compensate for bent or crooked rebar, and deep enough to hold two overlapping pieces or rebar placed two deep.

The open tie design allows the concrete to flow freely throughout the forms.

The full-length ties, recessed 1/2" within the foam, provide stability and one of the thickest continuing fastening surfaces in the industry.

  To visit Reward Wall Systems U.S.A. click here. rewardwalls.com